Osegi
Science·2 min read

Moon dust 3D-printed into Lego-style blocks, no glue needed

University of Arkansas researchers printed Lego-like building blocks from simulated lunar soil alone. No cement, no glue. They are still far weaker than concrete.

Small Lego-style building blocks 3D-printed from simulated lunar soil, shown against a grey background.
Image: zdnet.co.kr

Hauling cement to the Moon is a terrible idea. Every kilo adds fuel cost. So a team at the University of Arkansas has found a way to make building blocks out of moon dust alone, with no glue and no binder shipped from Earth.

The work was published in the journal npj Advanced Manufacturing. The researchers used laser powder bed fusion, a 3D printing method. A thin layer of powder is spread on a flat bed, and a laser fuses chosen spots. The bed drops a little, fresh powder goes on top, and the laser runs again. Layer by layer, a shape appears.

The process relies on sintering, which means heating powder until the grains bond together. That makes the material denser and stronger.

Why not just bring a binder?

Many earlier ideas for building with regolith, the loose lunar soil, need an added binder to hold the grains together. That binder would also have to come from Earth, which brings back the transport problem the whole approach tries to avoid.

What did they actually print?

Usually this printing method uses metal powder. Here the team used a commercial simulant of lunar highland soil, made to match samples brought back by the Apollo missions. They found that a relatively low-power laser was enough to sinter it.

The result was blocks a few centimetres across, shaped like Lego bricks. They can be linked together to make larger structures.

How strong are the blocks?

Not strong enough yet. The blocks reach a compressive strength of 3.4 MPa. Typical residential concrete is around 25 MPa, so there is a long way to go.

Wan Shou, the assistant professor of mechanical engineering who led the study, hopes further work will improve the technique and make it useful in the Moon's microgravity environment.

Apps worth a look

SUMO: the number puzzle

Tap the right tiles, add them up, hit the target. Easy to learn, hard to master. Free, for all ages.

Tags:moon3d printingregolithuniversity of arkansasspace construction

More from this day

See all →

More in: Science

See all →