FortiGate 60 firewall now runs Linux on a custom bootloader
A hobbyist replaced the locked firmware on an early-2000s FortiGate 60 with his own bootloader. It now runs Linux 2.4, USB, all three Ethernet ports and VGA.

The FortiGate 60 was built to boot one thing: FortiOS. One hobbyist decided it should boot whatever he liked, so he wrote his own firmware for it and got Linux running on the old firewall.
The FGT-60 is a router and firewall from the early 2000s, and inside it is close to an ordinary PC. It has a 400 MHz VIA C3 (Samuel 2) processor, VIA north and south bridge chips, 128 MB of PC133 memory soldered to the board, and three VIA VT6105M network controllers, one of them wired to a four-port switch. There is a serial console on a DE9 port and a VGA connector on the board.
The stock firmware is closed and only loads FortiOS images from the CF card. It may be an old LinuxBIOS build with GRUB as the payload. The author didn't dig into it much, because the OS images have high entropy, meaning they are compressed, encrypted or both.
How the custom FortiGate 60 firmware came together
He first tested on a VIA EPIA ITX board, but that one configures memory through an SPD chip, and the FortiGate doesn't work that way. Old LinuxBIOS/Coreboot code wouldn't set up the memory correctly, so he reverse-engineered the original ROM for that part and went no further than the basic bridge setup needed to make RAM work.
Then came the steps: polled IDE access, MBR parsing and an ext2 reader. The firmware loaded a leftover test ELF payload, and after that a Linux 2.4 kernel with initrd. A full Slackware install on a CF card then hung at ldconfig, until he found that the kernel lazily initialises the UART. Interrupts for it have to be enabled during hardware init, or everything crawls. He also added a memory test that counts the RAM instead of trusting the north bridge registers.
USB worked once the device was enabled in the south bridge and given an IRQ. Two of the network controllers came up quickly. The third, the DMZ port, started working after he enabled PCI IRQ B and gave eth2 IRQ 9. The original ROM only set up interrupts in a general way, he found, and the OS image seems to contain a later stage that finishes the job.
Does the FortiGate 60 have working VGA?
Yes, after some effort. The connector is labelled VGAB1, and the north bridge is an AGP part with a Trident Blade3D core. The picture is green because he lacked enough test clips for full RGB, and there are small timing glitches, with the image shifted left. The init code was reverse-engineered.
The author says it's a project for fun and learning, and that DOOM should run on it. Remaining work includes fuller interrupt setup, which probably also explains why the AGP GART module hangs, and setting the real-time clock.
Apps worth a look
Tap the right tiles, add them up, hit the target. Easy to learn, hard to master. Free, for all ages.
Talk to an AI conversation partner; every sentence comes back corrected and explained in your language. 9 languages, A1 to C2.
Open EDIFACT and X12 messages, see every segment explained, convert to JSON/XML, export PDF and Excel. Runs locally, no upload.
Pick who it is for, the occasion and their personality. The search engine reads product descriptions from local shops and ranks what fits. Free, no sign-up.
More from this day
See all →
Black Mesa Anomalous Improvements update: new lighting and Xen

Samsung TV-I pauses your movie when you leave the sofa

GTA VI runs at 30 FPS on every console, PS5 Pro included



