Osegi
Hardware·2 min read

floppy3.5: a Wi-Fi floppy reader for old Sony Mavica photos

A developer called bigcrimping built floppy3.5, a battery-powered 3.5-inch floppy reader that serves your old Sony Mavica photos to a browser over Wi-Fi.

A portable DIY floppy disk reader with a small screen and a 3.5-inch floppy inserted, next to an old Sony Mavica camera.
Image: Хабр

If you have a shoebox of floppy disks full of photos from an early Sony Mavica camera, and no drive to read them, here is a fix. A developer going by bigcrimping has built floppy3.5, a portable floppy reader that shows the pictures in your browser over Wi-Fi.

Some of the first Mavica cameras saved shots straight to floppy. The MVC-FD5 and MVC-FD7, for example, wrote JPEGs to 1.44 MB disks, which held roughly 30 to 40 photos at standard quality or 15 to 20 at higher quality. That is the use case the device is built around.

How does floppy3.5 work?

Inside is a slim floppy drive with a 26-pin connector, wired to a custom board with two chips: an RP2354A and an ESP32-S3. The first one runs the drive and reads the raw signals off the disk. The author ported the firmware of Greaseweazle, a project that works with floppies at the level of magnetic transitions. The ESP32-S3 decodes the data, builds a disk image in memory, parses the file system and runs the web interface.

A 4000 mAh LiPo battery makes it portable. A 1.9-inch IPS screen, 170 × 320 pixels, imitates a segment display and shows battery level, reading progress and a QR code that points to the web page.

How do you use it?

Once the device is on your Wi-Fi, the interface lives at floppy.local. A Read button starts reading the files, and Save copies them to a microSD card formatted as FAT32. Each copy goes into a new folder named like DISK0001, so nothing gets overwritten.

There is one limit. It only handles 1.44 MB HD floppies with FAT12, so other formats are out.

The whole project is open. The code is on GitHub, along with Gerber files for the board, the schematic, drawings and 3D models for printing the case. Everything is under the Unlicense, which means public domain, so you can build or modify it freely.

Apps worth a look

SUMO: the number puzzle

Tap the right tiles, add them up, hit the target. Easy to learn, hard to master. Free, for all ages.

Tags:floppy3.5sony mavicafloppy diskesp32-s3greaseweazleopen source hardware

More from this day

See all →

More in: Hardware

See all →